The automatic heading machine is one of the important equipments for manufacturing the fastening parts, and is mainly used for forming the head of the fastening member, and the working mode is a punching and two-die. What is a two-shot. It means a master mold, two dies, and the material is formed from the cutting knife. Therefore, the mold is the main and key part of the entire automatic heading machine. Due to the long-term operation of the automatic heading machine, the impact, crushing, collision, etc. will cause great damage or damage to the mold, and need to be replaced in time.
When do you need to replace the parts in the mold of the automatic heading machine? Obviously, in the operation of the automatic heading machine, the tools that are prone to wear and tear are scissors, clamps, a die, two die, scissors die, etc. Damage can also easily weaken or lose its original effect. From the eye blue, when the above-mentioned tool of the automatic heading machine is severely worn, cracked or even broken, it needs to be replaced. In the process of automatic heading machine, if the shape of the product produced does not meet the shape of the original design, it also shows that some tools need to be replaced.www.chamferingmachinechina.com