Home > Exhibition > Content

Comparison of steel ingot grinding machine and its clamping fixture structure

Jan 19, 2019

A steel ingot grinding machine, which is a specific type of grinding machine, and it is known that it is used as a steel ingot, so it is called a steel ingot grinding machine. Since, referring to this kind of grinding machine, let's take a good look at it, so that the correct and rational use of the product can be achieved.

 

1. When purchasing a steel ingot grinding machine, should you consider important factors and important aspects?

The purchase of products for ingot grinding machines requires that all relevant factors be taken into consideration, taking into account important factors and important aspects. However, what needs to be known is that as long as it is related to product purchase, it is an important consideration. Therefore, there must be no misunderstanding at this point, so as not to affect the correct purchase of the product. In addition, there are some factors that must be considered, and one cannot be missed.

 

2. Is the clamping fixture in the ingot grinding machine important?

The clamping fixture in the ingot grinding machine is an important device from a professional point of view, because if it has problems in use, it will affect the grinding quality and grinding effect of the ingot, so There will be this specific conclusion. Moreover, there is a need for continuous improvement to solve some problems, so its specific structural form is:

 

A new type of grinding machine ingot clamping fixture comprises a trolley body, a workpiece clamping device, a workpiece turning device and a controller. A cavity for mounting the steel ingot to be repaired is mounted on the trolley body, the workpiece turning device is in contact with the upper surface of the trolley body, and the controller is connected with the workpiece turning device for controlling the rotation angle of the ingot grinding.

 

3. Advantages of configuration and use of steel ingot grinding machine

(1) It can integrate light, electricity, machine and hydraulic control, and adopt PLC control and servo constant power control technology to ensure the equipment has good performance and meet different processing requirements.

(2) Some control devices can be used to ensure smooth grinding of the ingot, and the grinding pressure of the grinding wheel can be automatically adjusted by the hydraulic control system. According to the actual grinding condition, problems such as excessive grinding can be avoided.

 

4. Comparison between drill grinding machine and steel ingot grinding machine

The bit grinding machine is mainly used for grinding the drill bit, and can be quickly repaired, and is simple and convenient in operation. Therefore, from this point of view, the drill grinder and the ingot grinder are different because they are used differently, although they belong to the grinder. Therefore, this is two different dressing machines.www.chamferingmachinechina.com