Home > Exhibition > Content

Cutting machine precautions

Sep 16, 2019

I. Preparation before cutting

1. Care must be taken to check the performance of the equipment before use to ensure the integrity of the components.

2. The power knife switch, the tightness of the saw blade, the blade guard or the safety baffle should be inspected in detail, the console must be stable, and there should be sufficient illumination during night work. Cutting Machine 

3. Before use, first open the main switch, and test the airwheel for a few laps. After the safety is confirmed, the start is allowed.

4. Before operation, you must check whether the power supply matches the regular rated voltage of 220VA on the power tool, so as to avoid being connected to the 380VA power supply by mistake. 2. Cutting considerations Cutting machine

1. When the cutting machine is working, it is necessary to concentrate on not only keeping the mind clear, but also rationally operating the power tool. Do not operate the cutting machine after exhaustion, alcohol or taking stimulants or drugs.

2. The power supply line must be safe and reliable. It is strictly forbidden to pull it privately. Be careful not to be cut off. Care must be taken to check the performance of the equipment before use to ensure that the parts are intact.

3. Wear suitable overalls. Do not wear loose overalls. Do not wear jewelry or long hair. Do not wear gloves and cuffs.

https://www.chamferingmachinechina.com/