Home > Exhibition > Content

Inspection of the Square Billet Finishing Line before use and whether heavy-duty grinding wheels can be used

Oct 19, 2018

The Square Billet Finishing Line can be understood as a production line for a series of finishing operations for the blank of the billet. Therefore, the specific name of the Square Billet Finishing Line will be used, and the billet fines should be used correctly and reasonably. The whole line needs to have a correct understanding and in-depth understanding, so the next step will be to get the job done.

 

1. Does the Square Billet Finishing Line need to be inspected before and after use?

Before and after the use of the Square Billet Finishing Line, it is necessary to carry out inspections. Moreover, the inspection before use is very important and cannot be treated and carried out. It is necessary to check the tools that will be used, such as the spreader, and whether it can be used normally. If there are problems or safety hazards, they should be eliminated and eliminated in time. In addition, the finished products obtained through the Square Billet Finishing Line should be neatly arranged to avoid injuring people, thus avoiding damage or damage to the finished product.

 

2. In order to provide high-quality billet for high-speed rolling mills, is it necessary to have a Square Billet Finishing Line with higher finishing technology?

In order to provide high-quality billet for high-speed rolling mills, it is necessary to have a Square Billet Finishing Line with high finishing technology, and in order to achieve this, the process flow, floor plan, product outline, main equipment from the finishing line are required. The characteristics and technical performance, etc., to achieve the above objectives and at the same time, to ensure the finished product quality and performance of the Square Billet Finishing Line and its use.

 

3. Is it possible to use the advanced heavy-duty grinding wheel for grinding on the Square Billet Finishing Line?

From the current state of the art, it is possible to use the advanced heavy-duty grinding wheel for the grinding work, and the semi-finished steel product of the other side blank can be ground. Moreover, in addition to the billet, it is also suitable for semi-finished steel products such as steel ingots, billets, and steel sheets. However, in the processing and manufacturing of this kind of grinding wheel, it is necessary to use a suitable resin binder and a suitable pressing process to obtain a high-quality heavy-duty grinding wheel of good quality, thereby ensuring the grinding quality and the grinding effect of the billet. .

 

4. Is the billet low carbon peritectic steel continuous casting billet, can it be finished with Square Billet Finishing Line?

The billet low carbon peritectic steel continuous casting billet can be finished by the Square Billet Finishing Line, and can be used normally with good finishing quality and finishing effect. However, there is a high requirement for the surface quality of the continuous casting slab, and it is necessary to have a good surface quality. Otherwise, if there is a surface defect problem, it will increase the finishing workload and bring certain difficulties to the finishing, rolling and other processes. Therefore, this aspect needs to be taken seriously and treated seriously, to meet its surface requirements.http://www.chamferingmachinechina.com/