Home > Exhibition > Content

Performance characteristics and wide application of double-head chamfering machine

Apr 04, 2019

The double-head chamfering machine is mainly composed of a body, an outer corner chamfering table, a positioning bracket, an inner corner chamfering table, an inner corner turning head, an outer corner turning head, a motor and a transmission mechanism, and is in the body The horizontal upper plate is vertically mounted with inner and outer corners rotating the cutter head, and the lower end shaft portion is provided with a transmission mechanism, and the vertical angle of the inner corner chamfering table center inner corner cutter head exposed hole exposes the inner corner rotation cutter head.

The outer corner of the double-head chamfering machine rotates the groove on the lower side of the positioning table directly above the outer corner of the outer corner chamfering table, and the outer corner of the outer corner chamfering table is exposed. A lifting device is arranged between the outer corner chamfering table and the horizontal upper plate of the body, so that the outer corner chamfering table is vertically raised and lowered, so that the outer corner of the outer corner cutter can be adjusted by rotating the cutter head.

The double-head chamfering machine is suitable for the gear end chamfering of various gears, and can be widely used in mass production of automobiles, motorcycles, tractors, engineering, tobacco machinery and machine manufacturing industries. Gear chamfering machine is suitable for medium-sized gears, ring gears, sprockets, turbines, harmonic gears and other toothed parts (including spiral toothed teeth), which can be used for single-edge chamfering of the acute end of the gear teeth.

Performance characteristics of double-head chamfering machine

1. The operating system adopts PLC control, color touch screen interface, convenient programming and easy operation.

2. The machine tool is suitable for medium-sized gears, ring gears, sprocket turbines, bevel gears, harmonic gears and other toothed parts. It can perform one-side or double-sided chamfering of the acute end of the gear teeth.

3, double turret column automatic advance and retreat floating reset.

4, fully enclosed three-dimensional appearance and effective protection design, beautiful and generous.www.chamferingmachinechina.com