Home > Exhibition > Content

Steel pipe straightening machine requirements and initial position

Feb 28, 2019

The steel pipe straightening machine is mainly used for the special metallurgical equipment for correcting the bending degree and ellipticity of various pipes.

Steel pipe straightening machine features

The steel pipe straightening machine mainly adopts the vertical configuration when the system is started, the two-way drive, the transmission torque is large, the straightening quality is high, and the roll changing is convenient, and it is easy to bite. Suitable for online continuous operations.

Before the steel pipe straightening machine is turned on, it is necessary to effectively check whether the hydraulic oil of the hydraulic station, the reduction gear box, and the gear oil of the transmission box are full. Before the main motor starts, the corner inspection adjustment and the hydraulic system working pressure adjustment are performed.

Lubricating oil is injected into each lubrication point to check the operation of the mechanical transmission part for flexible operation.

The operator of the steel pipe straightening machine needs to wear labor insurance products, and must not leave the post or run the post after starting the machine. After the oil temperature and oil pressure of the hydraulic station have stabilized, the upper straightening roller is raised to the initial position. Manually receiving the material, the steel pipe is sent through the third pair of straightening rolls and then clamped by the upper straightening roll.www.chamferingmachinechina.com