Home > Exhibition > Content

Straightener operation and automation

Jun 11, 2019

There are many differences between the straightening machine and the ordinary machine tool in the process of operation. In the process of use, the different performances are in his control mode. In the process of using the equipment, the cutting process is mainly taken as an example. When it uses its ordinary machine tool to machine parts, the arrangement of a certain process step.

      

The order of the straightening machine, the displacement amount, and the selection of the relevant cutting parameters, etc., are often directly considered and judged by the operator in the process of use, and are operated manually by the operator. To control.

       

If the straightening machine is processed by its profiling machine or automatic machine tool, it can achieve the purpose of automatic control during the process, but the control method is mainly through pre-configured cam, Stop or master to achieve.

       

Although its automation is relatively high at the time of operation, its adaptability is relatively poor in the process of use, and it is impossible for the equipment to freely adjust the problems occurring in the process, even though modern CNC machine tools are self-contained. Many improvements have been made in adapting to adjustments.

       

In the process of processing, it is necessary to take into account every small detail in the process, and it has been proved that the mistakes and errors in the process of operation are mainly due to poor processing or calculation and programming. An error occurred.

      

 When the straightening machine is running, it is not allowed to stack its objects, so that it can better prevent its mechanical vibration from falling into the body. The material chute and the material frame should be installed straight, aligned with the guiding cylinder, straightening cylinder and undercut. The centerline of the knife hole.www.chamferingmachinechina.com