Billet finishing line it a finishing line, can be seen from its name, its operating object is for various billet, which contained a production line of knowledge content, is must master all, therefore, based on the specific requirements for the following, will undergo the billet finishing line of related study, in order to let everyone with learning content, in turn, to using billet finishing line for finishing the work smoothly.
1. Is the finishing line of the engine cylinder the same as the square billet finishing line?
Finishing of engine cylinder block production line, comparing with the billet finishing line, so, there is obvious difference, because these two kinds of finishing line on the finishing object is different, and, in addition to using the object, there are other differences, such as finishing equipment, finishing process sequence, so the two can not be to confuse, so as to avoid problems.
2. In the finishing line of the billet, the finishing operation of the medium and thick plate, which are the specific?
On the billet finishing line of plate finishing operations, which including the specific content, for cooling, examination, grinding, straightening, crossed, trimming, cutting head to tail, scale, sampling, identification, inspection, finished product storage, or heat treatment, and then inspection. When this is done, it is an important process of finishing the plate.
3. Finishing line and grinding line, can these two be used together?
Billet finishing line and line of the grinding, the two can be used together, and, if the two are used together, then, is that you can have very good use effect, and can also cooperate with Taiwan car furnace used together, such, can guarantee the finishing effect of material, and improve the use of the product performance.
4. Is it important in the finishing line?
Finishing, its on the billet finishing line, can saying is very important and indispensable, and it is contains a lot of content, such as cooling, cutting, straightening, heat treatment, surface treatment, product inspection, physical and chemical inspection and packing warehousing and so on. Moreover, we should treat and carefully carry out these operations to ensure the finishing effect of the square billet, and the smooth operation of the finishing section.http://www.chamferingmachinechina.com/